เครื่องซักผ้า panasonic ขึ้น h02

Panasonic Holdings Corporation was founded on 13th March 1918 and has been standing for more than 104 years. Based in Japan the company has its headquarters set in Kadoma, Osaka. Founded by Konosuke Matsushita as a light bulb socket manufacturer, today Panasonic offers a wide selection of products and services. Covering almost every aspect of your life it offers personal and industrial products.

While offering a wide pallet the company is able to focus on each product. Creating subcategories that cater to each sector such as washing machines, refrigerators, air conditioners, compressors, personal computers, cell phones, cameras, audio equipment, TVs, automotive electronics, aircraft entertainment systems, lithium batteries, and optical devices, and so much more.

This Japanese giant is known for quality builds but is no stranger to error codes. Rather than stressing out over basic things, we suggest you note down the error code you are facing and find out the real issue. To help you out we have listed down some of the most common error codes for Panasonic Washing Machines.

If there is an operation error or if there is a problem with the washing machine, such as faulty draining, spining etc; operation will stop, the warning buzzer will sound, and an error indication will be displayed.

Troubleshooting

Symptoms: Time indication increases or does not decrease

Points to be checked: Time indication is approximate. Remaining time is corrected during operation and displayed.

Symptoms: Operation time is longer than the time indication. Operation does not stop even after the preset time.

Points to be checked: The operation time may be longer if laundry is concentrated on one side or the water supply or drainage is not good. (Error Display “U11”, “U14”)

Symptoms: No operation

Points to be checked:

• Power failure?
• Is the lid closed completely?
• Has the power fuse blown or the breaker tripped?
• Is the power plug inserted completely?
• Is the water faucet turned on?
• Did you press “Start”?
• Is the timer preset?

Symptoms: Cannot change process settings (after start-up).

Points to be checked: Process settings can be changed during wash process by pressing “Pause”. To change the program or settings after the end of wash process, turn the power off and on again.

Symptoms: No water supply

Points to be checked:

• Is the water faucet turned on?
• Water outage?
• Is the water supply filter clogged with dirt?

Symptoms: Water is supplied in the middle of wash process

Points to be checked:

• If the water level drops, water is added automatically.
• With a large amount of laundry, water is added several times automatically.

Symptoms: The water level is too high for the amount of laundry.

Points to be checked: If laundry is wet or there is water in the tub before operation, the water level may be higher.

Symptoms: The water level is too low for the amount of laundry.

Points to be checked: With light clothes (of synthetic fibre, etc.), the water level may be lower.

Symptoms: Operation started with rinse, but water is not supplied.

Points to be checked:

• If there is no water in the tub, water is supplied after spin.
• If there is water in the tub, water is supplied after water discharge.

Symptoms: Operation suddenly changes to rinse process in the middle of spin. Only spin is desired, but operation starts with rinse

Points to be checked: If clothes are concentrated on one side of the tub, the washing machine automatically corrects unevenness by starting rinse process. (Place clothes as evenly as possible.)

Symptoms: Irregular rotation during spin

Points to be checked: The tub rotation speed is adjusted to reduce foaming during spin.

Symptoms: Power failure/ The breaker has tripped.

Points to be checked: Operation will resume from the point where it was stopped when the power is recovered (Auto Restart).

Symptoms: Water outage

Points to be checked: When water supply is recovered, remove the water supply hose, release turbid water from the faucet, and then start the washing machine.

Symptoms: Cannot select the Fragrance program.

Points to be checked: If Child Lock is set, the Fragrance program cannot be selected.

Cleaning the water supply filter

Clean the filter if water is not supplied properly

1. Turn off the tap.
2. Switch on the appliance.
3. Select the Cotton programme, and then press the Start button.
4. After 1 minute, switch off the appliance. Water has drained out of the water supply hose.
5. Disconnect the water supply hose from the appliance.
6. Clean the filter, which is on the rear of the appliance.
7. If the unit is supplied with the hose fitted with a water supply valve, turn off the tap supplying water to the appliance, disconnect the hose from the tap and then clean the filter on the hose in the same way.
8. Reconnect the water supply hose.
9. Turn on the tap and then check for leaks.

Panasonic Washing Machine PDF

Panasonic Washer Operating Instructions – NAF70B2